Rugby Dump Beds

Eliminator Series

rd

 Features & Specifications:

• 10 gauge steel on side construction. • 10 gauge steel floor with 2″ radius corners. • 12.4″ side height with brackets for 6″ side boards. • Double-walled side design with 2 vertical braces 6″ wide. • Fully boxed dirt-shedding top rail with 45° slope. • Front panel 18.4″ high of 10 gauge steel; seamless one piece design with a triple-bend top rail. • 5″ structural (6.7# per ft.) channel long sills with 3″ structural channel cross members on 16″ centers. • Recessed shock resistant rubber mounted, FMVSS 108 clearance lights, also three cluster lights provided in lower apron; includes rear facing stop-turn-tail lights mounted at top of corner posts for added visibility. • Valspar 2 part epoxy gray primer. • Sloped 1/4 cab shield with slotted viewing window. • Full height corner posts; 4.5″ deep with rear surface sloped 10° inward. • All appearance corners have large radius bends.

Tailgate Features & Specifications:

 • Sloped 10° inward and recessed flush with rear face of corner posts. • 18.4″ end height, four-way tailgate with adjustable rod on trip lever. • Constructed of 10 gauge steel. • Fully boxed brace frame with two vertical braces. • Concealed lower latch hardware with open access to upper EZ-LATCH™ mechanism. • Equipped with spreader chains and banjo eye chain holders in corner posts. • Optional – coal chute door and spreader apron. • Optional – 8 gauge floor.

Contractor Series

cd

Features & Specifications:

 • 10 gauge steel (50 grade) on side construction. • 7 gauge floor. Standard on 14′ and 16′, optional on 12′. • 17” side height with brackets for side board extensions. • Fully boxed dirt-shedding top rail. • 45° sloped rub rail. • Four vertical braces per side. • Full-depth boxed rear corner posts with concealed hardware for a clean, streamlined look. • Front has triple bend top rail horizontal brace with seamless front panel. • 7” structural channel long sills and 3” structural channel cross sills on 12” centers. • Recessed shock resistant rubber mounted, FS 108 clearance lights. • All appearance corners have radius bends. • 2 part epoxy gray primer. • 1/2 cab shield.

Features & Specifications on Fold Down Side Body:

 • Independently operated double door sides with removable center post. • Single pin release system to quickly remove center post. • Each side door features centrally located quick release lever. • 2 or 3 heavy duty double strap greaseable hinges per door. Tailgate Features & Specifications • Tailgate sloped 10° inward. • New oval shaped stop / turn / tail light in rear corner posts. • EZ-LATCHTM tailgate / Patented. • 23” end height, four-way tailgate with adjustable rod on trip lever. • Fully boxed brace frame with two vertical braces. • 10 gauge steel (50 grade) construction. • Angle iron reinforced decking at rear, ensures longer lasting gate seal. • 1-1/4” diameter top and 1″ bottom hinge pins. • Optional coal chute door. • Optional spreader apron.

Fold Down Series

Features & Specifications:

 • 10 gauge steel on side construction • 10 gauge steel floor with radius corners • Diamond Vogel 2 part epoxy gray primer • All appearance corners have radius bends • 45° sloped rub rail • 88” overall width on 8′ and 10′ 2-3 yard bodies; 96” overall width standard on all sizes • Sloped 1/4 cab shield with viewing window • Front panel of 10 gauge steel; seamless one piece design with a triple-bend top rail • Full height front tapered corner posts with clearance light cut-outs • One piece sides with two vertical side braces 6” wide • Fully boxed dirt-shedding top rail on sides • Sides include brackets for 6” side boards • Fold down sides feature centrally located quick release lever • Door handle positively extends and retracts 3/4” pins at each end, using a solid linkage member • Greaseable hinges on side, located so as not to interfere with underbody toolboxes • Recessed shock resistant rubber mounted, FS 108 clearance lights, also 3 cluster lights provided in lower apron • 5” structural channel long sills with 3” full width I-beam cross members on 16” centers

Tailgate Features & Specifications:

 • Four-way tailgate with adjustable rod on trip lever • 10 gauge steel construction • Fully boxed brace frame with two vertical braces • Dirt-shedding top and bottom rails • Reinforced decking at rear ensures longer lasting gate seal • Heavy duty 1.25” diameter top and 1” bottom hinge pins • Includes patented EZ-LATCH™ tailgate mechanism • Optional: coal chute door(s), spreader apron • Optional: 8 gauge floor • Optional: 1/2 cab shield in lieu of 1/4

Landscape Series

Body Construction:

 9′ 6″ and 12′ bodies have 3-7/8″ 10 gauge formed channel cross members on 16″ centers interlaced with 9″ 7 gauge formed long sills. 14′ and 16′ bodies have 4″ 10 gauge formed channel cross members on 16″ centers stacked on 7″ structural channel long sills. Unitized construction of 10 gauge platform decking and rub rail resulting in greater strength. 9’6″ and 12′ bodies available in primer or black powder coat. 14′ body available in primer or black powder coat upper sections with platform black acrylic enamel over primer.

 

Titan Series

td

Features & Specifications:

 • 10 gauge steel (50 grade) on side construction. • 8 gauge steel floor with radius corners. • 10 foot 6-8 yard body standard all 8 gauge. • Sides equipped with brackets for sideboard extensions. • Fully boxed dirt-shedding top rail. • 45 degree sloped rub rail. • Three vertical boxed braces per side. • Radius front corner posts with recessed clearance lights on lower post. • Tapered Full height rear corner posts 5 inches deep. • Front has fully boxed top rail with v-bend reinforced front panel. • 7” structural channel long sills and 4” I beam cross sills on 12” centers. • Recessed shock resistant rubber mounted, FMVSS 108 clearance lights, also three cluster lights provided in lower apron. • New oval-shaped stop/turn/tail lights in upper rear corner posts with side clearance lights on lower post. • 2 part epoxy primer. • All appearance corners have radius bends. • Sloped 1/2 cab shield. • Optional 3/4 cab shield. • Optional all 8 gauge on 5/7 yard dump body. • Optional LED Lights available.

Tailgate Features & Specifications:

 • Sloped 10 degree inward and recessed flush with rear face of corner posts. • Four-way tailgate with adjustable rod on trip lever. • Fully boxed frame, reinforced with two tapered verticle braces and one tapered horizontal brace. • Angle iron reinforced decking at rear, ensures longer lasting gate seal. • Heavy duty 1.25″ lower pins on tailgate, upper pivot arms are of .75″ plate. • Grease fittings on upper pivot arms. • Equipped with spreader chains and banjo eye chain holders in corner posts. • Optional coal chute door. • Optional spreader apron. • Optional air tailgate.

 

S2000 Series

s2d

Introducing the new and improved Rugby® Platform Body Line – we bring to you our SERIES 2000 Platform Bodies. Our Platforms and Stake Racks are still built tough to meet your high standards, but we’ve taken it a step further. The S-2000 Platforms come to you with high tensile steel rub rails, a full rear apron, and double-walled stake pockets to fit your needs. Along with these changes, we’ve added an all structural Super Heavy Duty Platform to our line, a new Heavy Duty Bulkhead, and Contractor Sides. Our economical prices and high quality make your decision easy -Rugby® SERIES 2000.